Tannoy SUBWOOFERS - Manual (Page 7)

7
INPUT MODULE OPTIONS
Passive (standard)
The basic connection panel supplied with any of the 110 Series subwoofers is an 8 Ohm speaker level input via barrier
strip. It is highly recommended that the audio signal be low pass filtered via an outboard active crossover. This input
module is ideal for systems requiring several subs that share a common outboard crossover and amplifier.
PASSIVE 110 INPUT MODULE
SPKR
LEVEL
INPUT
MADE IN CANADA
LOW PASS
Crossover
Speaker level input and outputs via barrier strip are passively filtered (100 Hz 12 db/octave low pass for the subwoofer
and 100 Hz 12 dB/octave high pass for the satellite) making this the ideal system for value and simplicity. The total
impedance load of the satellite speaker(s) should be limited to 3 Ohms or greater. Long wire runs to and from this module
need to use an appropriate gauge of speaker grade wire to retain proper damping and signal transfer characteristics.
PASSIVE 110 INPUT MODULE
SPKR
LEVEL
INPUT
MADE IN CANADA
CROSSOVER
HIGH PASS
CROSSOVER
HI-
PASS
OUTPUT
+
-
SPKR
LEVEL
INPT
+
-