TC electronic SDN BHD M3000 - Manual (Page 15)

13
STORE
Storing a User preset and handling preset names.
Storing a RAM preset with the same name:
- Press the relevant STORE key (Engine 1, 2 or Combined 1+2)
- Use the ADJUST wheel to select a location for your new preset. (You can store your preset in the RAM bank).
- Press OK to store.
Storing a RAM preset with a new name:
- Press the relevant STORE key (Engine 1, 2 or Combined 1+2)
- Select a location for your new preset using the ADJUST wheel. (You can store your preset in the RAM bank
- Move the cursor to the new name line and write the new preset name.
(Select letters with the ADJUST wheel and confirm each letter with OK)
- Select DONE and press the OK key to store name and preset.
Store location
Exercise 3 :
Entering a new name step by step using the Letterbox
Changing the name of a preset is a part of the store operation.
For this exercise select Engine 1 by pressing its RECALL key.
- Press the STORE key and you will see the display similar
to the one illustrated above.
- The M3000 automatically suggests a RAM location where
you can store the preset. Choose one yourself by turning the
ADJUST wheel.
- Use the CURSOR keys to select the name line. Use the
ADJUST wheel to select a letter and press the OK key to
confirm each letter. To change caps select CAP and
press OK.
- Finish the operation by selecting DONE in the letterbox and
press OK to store.
Combined Store
The procedure of storing a Combined preset is exactly the same
as when you store a normal preset.
Note: A Combined preset stores the routing of the Engines along
with the preset.
New preset name
Letterbox
Cursor arrows
CAPS LOCK
Indicator
Place cursor here and press OK
to finalize store operation
Using a Memory Card:
When inserting a memory card you gain access to the card bank.
You can store up to 250 Single and 50 Combined user presets on
a card depending on the size of the card.
By using the card handling features in the UTIL/MIDI menu you
are able to copy a selection or an entire preset bank to a card or
the other way around.
Card types
S-RAM Type 1 PCMCIA cards, with a minimum of 64 KB and a
maximum of 2 MB memory.
NOTE ! If the card holds other information than M3000 presets
info, the card will automatically be formatted the first time you
save or dump to the card.