Hardware reset, 7troubleshooting – Technicolor - Thomson TG787 User Manual
Page 86
E-DOC-CTC-20080118-0051 v2.0
80
7
Troubleshooting
Hardware Reset
Proceed as follows:
1
Make sure the Thomson Gateway is turned on.
2
Use a pen or an unfolded paperclip to push the recessed Reset button on the back panel. Push it until the
Power LED lights red - this will take about 7 seconds.
3
Release the Reset button.
4
The Thomson Gateway restarts.
Your system administrator may have disabled the physical reset button of the Thomson
Gateway. In this case, a hardware reset to defaults is not possible.