beautypg.com

TRENDnet TW100 BRF114 User Manual

Page 11

background image

Installation

7

3. Connect WAN Cable

Connect the DSL or Cable modem to the WAN port on the TW100-BRF114. Use the ca-
ble supplied with your DSL/Cable modem. If no cable was supplied, use a standard cable.

4. Power Up

• Power on the Cable or DSL modem.
• Connect the supplied power adapter to the TW100-BRF114 and power up.

Use only the power adapter provided. Using a different one may cause hardware damage

5. Check the LEDs

• The Power LED should be ON.
• The Status LED should flash, then turn Off. If it stays on, there is a hardware error.
• For each LAN (PC) connection, the LAN Link/Act LED should be ON (provided the PC is

also ON.)

• The WAN LED should be ON.

For more information, refer to Front-mounted LEDs in Chapter 1.

See also other documents in the category TRENDnet Hardware: