Connecting a dvd player with colorstream, Component video) and a vcr, Connecting your tv – Toshiba 27A35C User Manual
Page 9
9
Appendix
Using the
TV’
s
Features
Setting up
y
our TV
Using the
Remote Contr
ol
Connecting
y
our TV
W
elcome to
T
oshiba
Impor
tant
Saf
eguar
ds
Connecting a DVD player/satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, or TV
programs. You can record from the satellite receiver and TV, as well as
record one TV channel while watching another channel.
You will need:
• three coaxial cables
• one set of standard A/V cables
• one S-video cable
• one pair of standard audio cables
Note:
You can use a standard video cable instead of
the S-video cable, but the picture quality will
decrease. If you use an S-video cable
between the TV and DVD player/satellite
receiver, make the audio connections only
and remove the standard video cable.
You will need:
• two coaxial cables
• one set of component video cables
• one pair of standard audio cables
Connecting
your TV
Connecting a DVD player with ColorStream
®
(component video) and a VCR
This connection allows you to watch DVD, VCR, or TV programs and
record TV programs. You can record one TV channel while watching
another channel or a DVD. Your TV is capable of using ColorStream
(component video). Connecting your TV to a component video compatible
DVD player, such as a Toshiba DVD player with ColorStream
®
, can
greatly enhance picture quality and performance.
IN
OUT
VIDEO
IN from ANT
CH 3
CH 4
OUT to TV
AUDIO
L
R
OUT
AUDIO
OUT
VIDEO
COLORSTREAM
Y
Cb
Cr
L
R
S-VIDEO
TM
Y
P
B
P
R
VIDEO
IN
ANT (75
Ω)
VIDEO 1
AUDIO
S-VIDEO
L/
MONO
R
DVD player with ColorStream
®
TV
Stereo VCR
Y
P
B
P
R
VIDEO
IN
ANT (75Ω)
VIDEO 1
AUDIO
S-VIDEO
L/
MONO
R
Satellite IN
S-VIDEO
IN
OUT
VIDEO
AUDIO
L
R
OUT
VIDEO
AUDIO
L
R
IN from ANT
CH 3
CH 4
OUT to TV
OUT to TV
DVD player/ Satellite Receiver
Stereo VCR
TV
To satellite
To antenna
Note:
The ColorStream inputs on this TV are for use
with devices that output 480i interlaced
signals ONLY. This TV will not accept or
display 480p or 720p progressive scan
signals or 1080i interlaced high-definition
signals. If you connect a high-definition set-
top receiver, 480p progressive scan DVD
player, or other similar device to the TV’s
ColorStream inputs, YOU MUST SWITCH
THE DEVICE’S OUTPUT TO 480i INTER-
LACED MODE FIRST. Failure to do this will
cause a poor picture or no picture to display.
The unauthorized recording, use,
distribution or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
3U50101A(E)_P07-13
3/31/05, 6:18 PM
9