Toshiba 27A35C - Manual (Page 17)

17
Appendix
Using the
TV’
s
Features
Setting up
y
our TV
Using the
Remote Contr
ol
Connecting
y
our TV
W
elcome to T
oshiba
Impor
tant
Saf
eguar
ds
To unlock channels:
1. Press MENU, then press or to display the OPTION menu.
2. Press
or to highlight LOCK and then press or to
display the LOCK menu.
3. Use the Channel Number buttons (0–9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
4. Press or to highlight CH LOCK and press or to display
the CH LOCK menu.
5. Press or to highlight CLEAR, and then press ENTER. This
clears all channels from the list of locked channels.
6. Press EXIT to return to normal viewing.
Locking video input
With the VIDEO LOCK feature, you can lock out the input sources
(VIDEO1, VIDEO2, COLORSTREAM) and channels 3 and 4.
You will not be able to select the input sources with the TV/VIDEO
button or Channel Numbers unless you clear the setting.
To set up the video lock:
1. Press MENU, then press or to display the OPTION menu.
2. Press
or to highlight LOCK.
3. Press or to display the LOCK menu.
4. Use the Channel Number buttons (0–9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
5. Press or to highlight VIDEO LOCK.
6. Press or to select:
• OFF: Unlocks all video input
sources.
• VIDEO: Locks VIDEO1, VIDEO2 and
COLORSTREAM.
• VIDEO +: Locks VIDEO1, VIDEO2,
COLORSTREAM, channel 3 and
channel 4. This option should be used if
you use the antenna terminal to play a
video tape.
7. Press EXIT to return to normal viewing.
Setting the GameTimer TM
With the GameTimer TM feature, you can automatically activate the
VIDEO LOCK feature (VIDEO setting) to set a time limit for playing a
TV game (30, 60, 90 or 120 minutes).
To set up the GameTimer:
1. Press MENU, then press or to display the OPTION menu.
2. Press
or to highlight LOCK.
3. Press or to display the LOCK menu.
4. Use the Channel Number buttons (0–9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
5. Press or to highlight GameTimer.
6. Press or to select a time limit (30 minutes, 60 minutes, 90
minutes, 120 minutes or OFF).
7. Press EXIT to return to normal
viewing. After the GameTimer is
programmed, the display will appear
briefly every ten minutes to remind you
that the GameTimer is operating.
When the programmed time is
reached, the TV will change channels
automatically.
PICTURE AUDIO SETUP
CH
OPTION
CH LOCK START
SELECT ADJUST
GAME TIMER
START NEW PIN CODE
LOCK
OFF
VIDEO VIDEO+
OFF VIDEO LOCK
PICTURE AUDIO SETUP
CH
OPTION
CH LOCK START
SELECT ADJUST
GAME TIMER
START NEW PIN CODE
LOCK
OFF
OFF 30 60 90 120
VIDEO LOCK
Note:
After programming VIDEO LOCK, change
channels or press the TV/VIDEO button
before turning off the television.
Using the
TV’
s
Features
Menu/
Enter
Exit
Channel
Numbers
Menu/
Enter
Exit
Channel
Numbers
3U50101A(E)_P14-23 3/31/05, 6:19 PM 17