Toshiba 32AF44/35AF44 User Manual

Page 15

Intr

oduction

Connecting

our T

Using the

Remote Contr

Setting up

our T

Using the T

V’s

eatur

Appendix

Index

In the remote control code table (below and on the next page), find

the code for your device. If more than one code is listed, try each one

separately until you find one that works.

Set the Device Switch to the type of device you are programming the

remote control to operate—CBL/SAT (for a cable converter box or

satellite receiver), VCR (for a VCR or TV/VCR combo), or DVD

(for a DVD player or HTIB [home theater in a box]).

While holding down RECALL, press the Channel Number buttons

to enter the 3-digit code for your device.

To test the code, turn on the device, point the remote control at it,

and press POWER.
–If the correct code was entered, the device will turn off.
–If the device does not respond, repeat steps 1–4 using another code.

Note: After programming the TV remote control to operate your other device,
confirm that all necessary keys are operational. If some keys on the TV remote
control do not operate certain features on your other device, reprogram the
remote control using another code (if other codes are listed for your device).
If, after trying all listed codes, the necessary buttons do not operate your device,
use the device’s original remote control.

Remember to set the Device Switch back to “TV” to control the TV.

For future reference, write down the code(s) you used:

Programming the remote control to operate a cable converter box,
satellite receiver, VCR, DVD player, or HTIB (home theater in a box)

Your Toshiba TV remote control is preprogrammed to operate most Toshiba devices. To program your TV remote
control to operate a non-Toshiba device or a Toshiba device that it is not preprogrammed to operate, follow the steps
below. For details on using the remote control to operate the device, see page 17.

POWER

Channel
Numbers

}

RECALL

Device Switch

Note:

Each time you change the batteries, you must reprogram the remote control.

Some newer VCRs respond to either of two codes. These VCRs have a
switch labeled “VCR1/VCR2.” If your VCR has this kind of switch and does
not respond to the codes for your VCR brand, set the switch to the other
position (“VCR1” or “VCR2”) and reprogram the remote control.

DEVICE

CODE

DEVICE

CODE

Cable converter box

ABC: 061, 062, 063, 082,

084, 087, 091, 092,
096, 098

Archer: 065, 092, 097, 099
Cableview: 064, 094
Century: 092
Citizen: 090, 092, 097
Contec: 083, 085, 086,

088, 093, 098

Diamond: 093
Eagle: 091
GE: 061, 062
Gemini: 069, 070, 094

General Instruments: 062,

089, 096

Hamlin: 093
Hitachi: 062, 095, 096
Jasco: 097
Jerrold: 062, 069, 071,

082, 086, 089, 091,
096

Magnavox: 072, 096
Memorex: 091, 092, 104
Multi Canal: 090
Novavision: 101
Panasonic: 081, 083, 085
Philco: 087

Philips: 066, 067, 068,

070, 072, 073, 074,
075, 091, 092

Pioneer: 076, 077
Proscan: 061, 062
Radio Shack: 092, 097,

099

RCA: 064, 081
Realistic: 065
Recoton: 102
Samsung: 077, 090
Scientific Atlanta: 063,

078, 079, 080, 088,
098, 101, 105

Sears: 095
Signature: 062
Signature 2000: 096
Sprucer: 081, 085
Starcom: 069, 082, 087,

096, 103, 104

Stargate: 069, 090
Sylvania: 095, 100
TeleView: 090
Texscan: 100
Tocom: 071, 084, 085
U. S. Electronics: 087,

096, 098

United Cable: 082

Universal: 065, 092, 097,

099, 102, 103

Wards: 096

Satellite receiver

Alphastar: 038, 059
Chaparral: 034
DISH Network: 057
Drake: 020, 040, 044, 046,

050, 053

Echostar: 018, 041, 051
Express Vu: 057
Fujitsu: 027
GE: 008, 009, 013

Remote control codes

In some cases you may not be able to operate your device with the TV remote control. Your other device may use a
code that is not recognized by the TV remote control. If this happens, you will need to use the remote control provided
with the device.