Technicolor - Thomson 5400LDK - Manual (Page 36)

4-12 Operator's Manual LDK 5400 - Triax Adapter for LDK 100 Series Location of Controls and Functions
Progr
Prod
Eng Call
CVBS (Option)
Eng
Off
Prod
Loc Ext
Mix
Mic
Dc in
Scrip
Light
VF Ext
Rear
Power on
Breaker
Front
Rear
Front 48V
Intercom
Headset Programme volume control
This control varies the volume of the programme
intercom signal to the cameraman's headset.
Headset Engineering volume control
This control varies the volume of the engineering
intercom signal to the cameraman's headset.
Cameraman intercom connector
Headsets with dynamic or electrete type microphones
can be connected to this socket.
Headset Production volume control
This control varies the volume of the production
intercom signal to the camera operator's headset
when the selection switch
2 is in the FRONT position.
Intercom routing switch
A 3-position switch that routes the camera operator
intercom microphone signal to engineering (ENG) or
production (PROD), or turns off the intercom. The
momentary VTR switch at the front of the camera, or
on the lens can be used to route the cameraman's
intercom microphone signal to production, regardless
of the position of this switch.
Headset Production vol. control selection
A 2-position switch for the production intercom which
selects control of the volume at the front of the
camera
7
or control of the volume at the rear
3
.
Headset Production volume control
This control varies the volume of the production
intercom signal to the camera operator's headset
when the selection switch
2 is in the REAR position.
1
1
2
2
3
3
4
4
5
5
6
6
7
7