Technicolor - Thomson 5400LDK User Manual
Page 32
4-8
Operator's Manual LDK 5400 - Triax Adapter for LDK 100 Series
Location of Controls and Functions
Tally switch
The tally switch is used to control the tally indicators
at the front of the viewfinder and at the rear of the
carrying handle.
When this switch is set to the ON position, the tally
indicators light when the camera is on-air.
When this switch is set to the OFF position, the tally
indicators do not light when the camera is on-air.
Tally indicators (red)
The red tally indicators at the front of the viewfinder
and at the rear of the carrying handle light to indicate
that the camera is on-air. They do not light when the
camera is on-air if the tally switch is set to the OFF
position.
1
1
2
2