Technicolor - Thomson 5400LDK - Manual (Page 31)

Location of Controls and Functions Operator's Manual LDK 5400 - Triax Adapter for LDK 100 Series 4-7
Progr
Prod
Eng Call
CVBS (Option)
Eng
Off
Prod
Loc Ext
Mix
Mic
Dc in
Scrip
Light
VF Ext
Rear
Power on
Breaker
Front
Rear
Front 48V
Monitoring Functions
CVBS output connector
This BNC connector provides a 1Vpp CVBS output
signal when the optional encoder (LDK 5405/00 for
PAL or LDK 5405/50 for NTSC) is fitted.
Viewfinder / External video output connector
This BNC connector carries the viewfinder signal or
the external video signal from the Base Station
depending on the positon of switch
3 .
Video output selection switch
This switch determines whether the viewfinder signal
from the camera or the external video signal from the
Base Station is available at connector
2 .
Viewfinder selection switch
This switch is used to select the camera Y signal or an
external signal (set with
5
) for display in the viewfinder.
The Ret. button on the lens also selects this signal in
parallel with this switch.
External signal selection switch
This switch selects the signal displayed in the
viewfinder when the viewfinder signal selection switch
4 is in the EXT position. The signal displayed is as
follows:
EXT : Base Station external input 1.
MIX : Base Station external input 1 and
camera Y signal mixed.
Note
Switches
4
and 5 are disabled when the
SuperXPander is used.
1
1
2
2
3
3
4
4
5
5