Texas Instruments TAS5518 - Manual (Page 14)

www.ti.com
2.3 Loudspeaker Connectors (J101–J107)
1
2
PCB Connector
(Top View)
Loudspeaker Connectors (J101–J107)
CAUTION
Both positive and negative speaker outputs are floating and may not be
connected to ground (e.g., through an oscilloscope).
Figure 2-4. J101–J107 Pin Numbers
Table 2-5. J101–J107 Pin Description
PIN NET NAME
DESCRIPTION
NO. AT SCHEMATICS
1 OUT-1 Speaker negative output
2 OUT-2 Speaker positive output
System Interfaces 14 SLEU074 – June 2006
Submit Documentation Feedback