TRENDnet TEW-671BR - Manual (Page 35)

32
7.6. IP Filter
Enable IP Filtering: Check to enable or disable IP Filtering.
Deny: If you select “Deny” then all clients will be allowed to access Internet accept for the
clients in the list below.
Allow: If you select “Allow” then all clients will be denied to access Internet accept for the
PCs in the list below.
Add PC IP Address
You can click PC to add an access control rule for users by an IP address or IP
address range.
Remove PC IP Address
If you want to remove some PC IP from the IP Filtering Table, select the PC you
want to remove in the table and then click Delete Selected. If you want to remove all
PCs from the table, just click the Delete All button.
Click Apply at the bottom of the screen to save the above configurations.