Telenetics MIU9.6FPD - Manual (Page 9)

MIU9.6FPD Installation, Operation & Diagnostics April 25, 1998 Page 7
5. METALLIC CONDUCTOR SPECIFICATIONS
The MIU9.6FPD contains digital circuitry for connection 2 or 4-wire
metallic conductors (eg; pilot wires). The MIU9.6FPD will also interface
to Power Line Carrier or Microwave radio voice channel networks.
The MIU9.6FPD has an RJ-11terminated connector. The following lists the
MIU9.6FPD conductor interfaces
Conductor Type:
Conditioned or unconditioned, Bell type 3002, 2 or 4-wire, full duplex
voice grade or metallic lines or better.
Analog Line Specifications:
Bandwidth 300
Hz to 3400 Hz ( ±3dB)
Impedance 600 / 900 ohms , balanced
Frequency Response 400 to 3000Hz ( ±2dB)
Receiver Input Level -16dBm max.
Output Level +7 dBm
Noise Signal Level -48 dBmO