Telenetics MIU9.6FPD - Manual (Page 7)

MIU9.6FPD Installation, Operation & Diagnostics April 25, 1998 Page 5
4. MODEM SPECIFICATIONS
Modulation: Pulse Position Modulation (PPM)
Synch/Async: Asynchronous Only
Data
Rate: 0 – 1200bps
Error
Correction: None
Data Compression: None
Data Modulation Connectivity:
Using 16ms Polling Test
99.999% or better at -37dBm
99.5% or better at -40dBm
95% or better at -43dBm
Serial Formats and Flow Control:
Asynchronous and RTS/CTS flow control
Analog Interface
Tx Output Level: -0 dBm or -10 dBm *
Rx Sensitivity: -43dBm or -33dBm *
-43dBm for constant carrier
-40dBm for polling carrier
Line Termination: Dip Switch Selectable *
Line Impedance: 600 ohms balanced
2 or 4 Wire Configuration: Dip Switch Selectable *