Texas Instruments 8200IC - Manual (Page 23)

23
3M™ Digital WallDisplay
© 3M 2003. All Rights Reserved.
Menu System
Menu Navigation
Most adjustments and settings are available in the main menu and sub-menus. To navigate and make adjustments,
use the 3M Digital WallDisplay’s Menu Keypad button or the remote control’s Menu and Disk Pad buttons.
Colorful—Bright Slider
The Colorful—Bright slider adjusts the brightness, contrast, and color saturation levels simultaneously. Move
the slider toward Colorful to achieve maximum color saturation and contrast. Move the slider toward Bright to
achieve maximum brightness.
To adjust the Colorful—Bright slider:
1. Open the menu system by pressing the remote control Menu button or any arrow on the Menu Keypad.
2. Select the Colorful—Bright slider by pressing the up or down arrows on the remote control Disk Pad or
Menu Keypad.
3. Move the slider by pressing the left or right arrow of the Disk Pad or Menu Keypad.
4. Close the menu system by pressing the Menu button or scrolling to Exit and selecting it with the right
arrow of the Menu Keypad.
MENU KEYPAD
1
2
3
4