Toshiba SX-2981 - Manual (Page 20)

20
BASIC OPERATION
Basics
TONE/PAUSE
EXAMPLE : To make a call “0 12345678” with tone dialing in
pulse mode, press
.
INTERFERENCE OR STATIC
If you hear noise during a call, press to
select another channel. The LCD displays
“Scanning” while changing a channel.
BASE SPEAKERPHONE
Press .
To hang up, press .
SWITCHING FROM THE SPEAKERPHONE TO THE HANDSET
To switch to the handset while you are using the base unit
speakerphone, pick up the handset from the base unit. Then you can
continue talking with the handset.
SPEAKER
SPEAKER
CHANNEL
8 7
6 5 4 3 2 1 PAUSE 0 TONE/
PAUSE
Talk 0:15
Scanning
To
To temporarily switch to tone dial
(When the handset is set to pulse mode),
see page 14.
To enter a pause within the dialing sequence
Do this
Press . The following numbers will
be sent as tone dialing.
Press . “P” appears in the display
which represents a pause.
PAUSE
TONE/
PAGE
VOL/+
VOL/–
SPEAKER
SX-2981.qx 6/18/1 3:11 PM Page 20