Number rediall - setting the ringer volume, Basic operation, Number redial – Toshiba SX-2981 User Manual
Page 19: Out of range, Handset earpiece volume setting, Handset ringer volume setting, Ringer off
BASIC OPERATION
19
Basics
3-NUMBER REDIAL
You can redial any of the last three numbers dialed from the handset:
1
Press
in standby mode. The last dialed number (Redial 1)
appears.
Each time you press
, the LCD displays one of the three last
dialed numbers (Redial 1 to Redial 3).
2
After the desired number has been selected, press
. The call will be
connected.
NOTES:
• The handset redials only up to 32 digits even for a number that exceeds this limit.
• When you press
after pressing
or
, the latest dialed
number will be dialed automatically.
OUT OF RANGE
During a call, as you begin to move too far from the base unit, the
noise increases. Then, you should move close to the base unit. If you
travel out-of-range, your call terminates.(See page 20 “Interference or
static”).
HANDSET EARPIECE VOLUME SETTING
To adjust the earpiece volume, press
(
or
) during a call.
HANDSET RINGER VOLUME SETTING
To adjust the ringer volume, press
(
or
) during standby
mode.
RINGER OFF
You can turn off the handset ringer.
During standby mode or when you set the ringer volume, press and
hold (
)
till
“Ringer Off” appears.
To resume the Ringer, press
(
or
).
VOL/RING
VOL/RING
VOL/RING
VOL/RING
FLASH
TALK
REDIAL
TALK
REDIAL
REDIAL
Ringer Off
SX-2981.qx 6/18/1 3:11 PM Page 19