Optical drive components – Toshiba SATELLITE M500 User Manual
Page 110
110
Learning the Basics
Using the optical drive
Optical drive components
The optical drive is located on the side of the computer. The Media
control buttons are located above the keyboard and can be accessed
when the display panel is open.
Depending on the type of drive on your computer, the procedure to
insert and remove optical discs may differ.
❖
If your computer includes a slot style optical drive (available
on certain models), see
“Inserting an optical disc (slot-type
for more information.
❖
If your computer includes a standard tray style optical drive
(available on certain models), see
(tray-type drive)” on page 113
for more information.
Your optical drive may look like this:
(Sample Illustration) Optical drive
Drive in-use indicator light—Indicates when the drive is in use.
Eject button—Press to release the disc tray.
Do not press the eject button or turn off the computer while the drive
in-use indicator light is glowing. Doing so could damage the disc or
the drive.
When the disc tray is open, be careful not to touch the lens or the
area around it. Doing so could cause the drive to malfunction.
Manual eject hole (tray-type drive only)—Use if you need to
release the disc tray when the power is off. Use a straightened paper
clip or other narrow object to press the manual eject button located
inside the hole.
Never use a pencil to press the manual eject button. Pencil lead can
break off inside the computer and damage it.
Drive in-use indicator light
Eject button
Manual eject hole (tray-type drive only)