Toshiba S2E21 - Manual (Page 25)

TOSHIBA
S E T T I N G
R Y O / P S E L .
0
I N S T
U B
S P A R E 1
S P A R E 2
jetting
output
30-3
Item Description
Sets the operation condition for the output
relay.
Selects a unit that drives the alarm output
relay when an alarm is detected.
Enter either (not operate) or "1" (operate).
The output is an output of alarm detections
from the unit that drives the alarm output
relay.
Locked-rotor has no alarm. But it isdetected
as an overload alarm instead.
at