Toshiba Satellite A100/A105 - Manual (Page 33)

33 Setting up your computer and getting started
5.375 x 8.375 ver 3.1
Static electricity can damage the memory module. Before you handle
the module, touch a grounded metal surface to discharge any static
electricity you may have built up.
To avoid damaging the memory module, be careful not to touch its
pin connector on the side you insert into the computer.
9 Remove the new memory module from its antistatic
packaging.
Avoid touching the connectors on the memory module or on the
computer. Grease or dust on the connectors may cause memory
access problems.
10 Insert the memory module into the socket on the
underside of the computer.
11 Hold the memory module by its edges so that the gold
connector bar faces the slot, at approximately a 45-degree
angle to the socket.
Sample inserting the memory module into the socket
12 Check that the module is inserted completely into the
socket and lined up squarely with the socket clips.
Sample aligning the module into the socket
clip
clip