2 faq – TrekStor 115 User Manual
Page 26

4 Additional Information
4.2 FAQ
This section includes frequently asked questions and common problems
and possible solutions.
I pressed
’
■q’
, but nothing appears on the LCD.
❼ There is no battery in the player or the battery is dead. Replace
the battery.
❼ The key lock function is on. Slide back the ’Hold’ hold button to
switch off the key lock function.
My computer does not recognize my TrekStor i.Beat 115 2.0 .
❼ You are using Windows 98 and have not installed the driver. Install
the driver as described in section 3.2.
❼ The firmware has been damaged. To solve this problem, follow
these steps:
– Remove the battery.
– Connect your TrekStor i.Beat 115 2.0 to your computer and
hold down the
’
■q’
button for approximately 3 seconds.
20
TrekStor