TrekStor 115 - Manual (Page 16)

2 Functions of the TrekStor i.Beat 115 2.0
Recording using the line-in jack
Connect an external source such as a CD player to the headphone jack.
Press the ’A-B’ button on your TrekStor i.Beat 115 2.0 as you start the
external source. ’Recording’ appears on the display. Recording begins,
and the display indicates the length of the previous recording.
To stop recording , press
’
■q’ . The recorded file is saved to the LINE direc-
tory. Press ’M’ to navigate through your saved recordings (see 2.2.6).
2.3.4 Music Player setup
Go to the main menu. Use the ’V-’ and ’V+’ buttons to select ’Play
Setting’ and press
’
■q’ to confirm your selection.
You can then configure the settings for the equalizer and repeat and play
settings.
Equalizer Setup
Select ’Equalizer’ and press
’
■q’ to confirm your selection. There are 5
different equalizer modes (Normal, Pop, Jazz, Classik, Rock). Press
’
■q’
to activate one of them.
10 TrekStor