beautypg.com

Appendix, Troubleshooting – Toshiba 32AF13 User Manual

Page 35

background image

35

W

elcome to

Toshiba

Connecting

y

our T

V

Using the

Remote Contr

ol

Setting up

y

our T

V

Using the T

V’s

F

eatur

es

Appendix

Appendix

Troubleshooting

Before calling a service technician, please check the following table for possible causes of the problem and
some solutions.

Problem

Solution

TV will not turn on

• Make sure the power cord is plugged in, and then press

POWER

.

• The remote control batteries may be dead. Replace the batteries or

press the

POWER

button on the TV.

No picture, no sound

• Check the antenna/cable connections.

No sound, picture OK

• The sound may be muted. Press

MUTE

or

VOLUME

y

z

.

• The station may have broadcast difficulties. Try another channel.

Poor sound, picture OK

• The station may have broadcast difficulties. Try another channel.

Poor picture, sound OK

• Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• Adjust the PICTURE menu.

Poor reception of broadcast channels

• Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• If you are using a VCR, make sure the TV/VCR button is set

correctly.

Cannot receive above channel 13

• Make sure the TV/CABLE feature in the SET UP menu is set to TV.

Unable to select a certain channel

• The channel may be locked out with the Block Channel feature

(SET UP/V-Chip Control menu), or erased with the Add/Erase
feature (SET UP menu).

Black box on screen

• Set the CLOSED CAPTION feature to OFF.

Multiple images

• The station may have broadcast difficulties. Try another channel.
• Use a highly directional outdoor antenna.

Poor color or no color

• The station may have broadcast difficulties. Try another channel.
• Adjust the TINT and/or COLOR in the PICTURE menu.
• If you change the direction of the TV while it is turned on, the

picture could suffer from color shading. If so, turn the TV off and
allow it to cool down for several hours before turning it on again.

No stereo or SAP sound from a

• Make sure the MTS feature is set properly (AUDIO menu).

known MTS broadcast

The remote control does not operate

• Make sure the TV/CABLE/VCR switch is set properly.
• There may be an obstruction between the remote control and the

remote control sensor on the TV.

• The remote control batteries may be dead. Replace the batteries.

The V-Chip PIN code does not work

• Change or reset the PIN code.