Operating instructions – Tanita WB-110MA User Manual

Page 6

1. Standard Weighing Procedures

2.Tare Weighing

3.Cancellation of Tare Weighing Function

1. Turn on the power by pressing the

key.

2. After all the segments flash, [0.0kg] is displayed.

3. Step onto the center of the scale platform.

The weight reading will be displayed.

4. Measurement is completed.

When the person being weighed steps off the scale, the display will return to [0.0kg].

Turn off the power by pressing the

key.

1. Turn on the power by pressing the

key.

2. After all the segments flash, [0.0kg] is displayed.

3. Carefully place the tare items (clothes, etc.) on the center of the platform.

The weight of the items will be displayed.

4. Press the

key.

An arrow t[NET] will appear next to the mark and [0.0kg] will be displayed.

5. When weighing a person/object including tare items, the weight of the person/object minus that

of the tare items, which is the net weight, will be displayed.

•

To change the tare weight, cancel the tare weighing function and repeat from step 3.

•

When using the tare weighing function, the measurement range is reduced by the tare weight.
(Measurement Range) = (Maximum Measurable Weight) – (Tare Weight)

1. Remove the tare items (clothes, etc.) from the platform.

The weight will be displayed as a negative value.

2. Press the

key.

The arrow tnext to the [NET] will disappear and [0.0kg] will be displayed.

3.Operating Instructions

4.BMI Calculation:

1. Turn on the power by pressing the

key.

2. After all the segments flash, [0.0kg] is displayed.

3. Push

for within two seconds.

[0.0kg] and the default height [170cm] will be displayed.

4. Set your height with the

key.

(This can also be entered after you step on the scale).

Stand still on the scale platform.
The weight will be displayed.

5. Once your height and weight have been established, press

The weight and BMI figure will be displayed.

* By pressing the

key in BMI mode, the scale will switch alternately between BMI and

height (and can be changed with the

key) display.

* The display will return to [0.0 kg] and the default height [170cm], if it changes to a height

display after stepping off the scale during measuring BMI.

Guidelines based on NIH/WHO BMI

Under Weight

Normal Range

Pre obese

Obese
Obese
Obese

CLASS

lll

BMI

18.5

BMI

This manual is related to the following products:

WB-100MA