Do not disturb override, Executive override, Class of service override – Toshiba Standard Telephone User Manual
Page 30
Strata CTX Standard Telephone User Guide October 2002
21
Advanced Operation
Override Calls
Do Not Disturb Override
Do Not Disturb (DND) Override lets you send a call waiting tone or ringing to a station in DND mode
to indicate that a call is coming in. Your telephone may be programmed to block DND Override from
other telephones. Your station’s LCD shows the station you have called is in the DND mode.
OCA is possible to DND stations from stations that are programmed for DND Override.
➤
To use DND Override
➤
After reaching a station in DND mode, press
2
. A tone signal is heard at the DND station,
indicating a call is coming in.
Executive Override
Executive Override enables you to enter an established conversation. Your telephone can also be
programmed to block Executive Override from other telephones.
➤
To perform Executive Override
➤
After reaching a busy station, press
3
You enter a conference with the busy station and the party to whom he was talking. The called parties
may hear an optional tone signal prior to your entering the conversation. If you do not have Override
privileges, you will camp on.
Class of Service Override
By dialling a Class of Service Override code, a user can change a station’s set of privileges to one
associated with the override code. When the call is terminated and another is attempted from the same
station, the original Class of Service is applied. This allows selected users to override restrictions that
are placed on any telephone in the system.
➤
To perform Class of Service Override
1.
Access an outside line. You hear dial tone.
2.
Press
Recall
+
#471
. Dial tone stops.
3.
Enter the Class of Service Override Code (four digits). You hear dial tone. For security reasons, the
override codes are only available on a selected basis. See your CTX System Administrator.
4.
Dial a telephone number.