Contrast mode, Screen saving mode – Transcend Information T.sonic 520 User Manual
Page 24

20
2. Push the Menu Switch to the right (Next)
or to the left (Previous)
to change
the Reset settings (“Yes” item, or “No” item). Press the Menu Switch inwards
again
to complete the Reset setting.
3. If you select the “No” item, the system settings will not be changed.
4. If you select the “Yes” item, the system settings will be changed to the factory default
values.
Contrast Mode
Sets the contrast of the OLED display.
1. Push the Menu Switch to the right (Next)
or to the left (Previous)
to select the
Contrast icon in the Settings, and then press the Menu Switch inwards
to enter.
2. Push the Menu Switch to the right (Next)
or to the left (Previous)
to change the
Contrast setting. Press the Menu Switch inwards
again to complete the Contrast setting.
Screen Saving Mode
Set a time to darken then OLED display automatically.
1. Push the Menu Switch to the right (Next)
or to the left (Previous)
to select the
Backlight icon in the Settings, and then press the Menu Switch inwards
to enter.
2. Push the Menu Switch to the right (Next)
or to the left (Previous)
to change the
Backlight settings. Press the Menu Switch inwards
again to complete the Backlight seting.
3. If you select 5 Sec, the screen saver will have a delay of 5 seconds before activating. If you
select Always off the screen saver will not be activated and the OLED display will remain
illuminated.