Toshiba 32A35C - Manual (Page 19)

19
Appendix
Using the TV
’s
Features
Setting up
your TV
Using the
Remote Control
Connecting
your TV
W
elcome to T
oshiba
Important
Safeguards
PICTURE AUDIO SETUP
CH
OPTION
CH LOCK START
SELECT ADJUST
GAME TIMER
START NEW PIN CODE
LOCK
OFF
OFF
VIDEO LOCK
POWER
1 2 3
4 5 6
7 8 9 0
TV VCR CABLE
DVD
CH +
CH –
FAV EXIT RECALL TV/VIDEO
CH RTN
CODE MTS SLEEP MUTE
RESET CAP/TEXT
DVD CLEAR DVD MENU TOP MENU
1/2
MENU/
ENTER
VOL
FAV
VOL
+ –
+10
VOL
DISPLAY
POWER
1 2 3
4 5 6
7 8 9 0
TV VCR CABLE
DVD
CH +
CH –
FAV EXIT RECALL TV/VIDEO
CH RTN
CODE MTS SLEEP MUTE
RESET CAP/TEXT
DVD CLEAR DVD MENU TOP MENU
1/2
MENU/
ENTER
VOL
FAV
VOL
+ –
+10
VOL
DISPLAY
PICTURE AUDIO SETUP
CH
OPTION
END EXIT
SET ENTER
TV CABLE
SELECT
CH LOCK : CH 12
0 0 0
0 0 0
0 0 0
LOCKED CH
SET/CLEAR SET CLEAR
PICTURE AUDIO SETUP
CH
OPTION
CH LOCK START
SELECT ADJUST
GAME TIMER
START NEW PIN CODE
LOCK
OFF
OFF
VIDEO LOCK Using the TV
’s
Features
Locking channels
With the CH LOCK feature, you can lock specific channels. You will not
be able to tune locked channels unless you clear the setting. You can
choose to lock up to nine TV channels and nine cable channels.
To lock channels:
1. Use the Channel Number buttons (0–9) to display the television
channel you wish to lock.
2. Press MENU, then press or to display the OPTION menu.
3. Press
▲ or ▼ to highlight LOCK.
4. Press or to display the BLOCKING menu.
5. Use the Channel Number buttons (0–9) to enter your PIN code,
then press ENTER. The LOCK menu appears.
6. Press ▲ or ▼ to highlight CH LOCK and
press or to display the CH LOCK
menu.
7. Press or to select the following:
• SET– to set the channel as one to be
locked. Then press ENTER.
• CLEAR– to clear all channels from the
list of locked channels.
Then press ENTER.
8. Repeat steps 1 through 7 to lock other
channels. When you are finished locking
channels, press EXIT to return to
normal viewing.
If you try to tune a locked channel, the
TV will not display it, but will display the
nearest unlocked channel.
4. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the LOCK menus for the first time, select a
four-digit number to be your PIN code. Press ENTER. The LOCK
menu appears.
5. You may now enable blocking. See “Locking channels” (below),
“To change your PIN code” (below), “Locking video input” (page
20), or “Setting the game timer” (page 20).
To change your PIN code:
1. Press MENU, then press or to display the OPTION menu.
2. Press
▲ or ▼ to highlight LOCK.
3. Press or to display the BLOCKING menu.
4. Use the Channel Number buttons (0–9) to enter your PIN code.
Press ENTER. The LOCK menu appears.
5. Press ▲ or ▼ to highlight NEW PIN CODE and press or to
display the NEW PIN CODE menu.
6. Use the Channel Number buttons (0–9) to enter a new code.
Press ENTER.
7. Press EXIT to return to normal viewing.
Note:
If you forget your PIN code, press RECALL
four times within five seconds from the
BLOCKING menu. The PIN code will be
released (BLOCKING RESET status restored).
Menu/
Enter
Exit
Channel
Numbers
Recall
Note:
After programming CH LOCK, change
channels before turning off the television.
Menu/
Enter
Exit
Channel
Numbers
J3N51521A(E)_P17-25 20/12/2004, 3:00 PM 19