Toshiba 32A35C - Manual (Page 16)

16
Adding channels to the TV’s memory
Your TV will stop on specific channels that are stored in the TV’s
channel memory when you press Channel + or –. Use the steps below
to set all active channels in your area automatically.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase specific channels manually.
To add channels automatically:
1. Press MENU, then press or to display the SETUP menu.
2. Press
▲ or ▼ until the TV/CABLE
selection is highlighted.
3. Press or to highlight either
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press ▼ to select CH PROGRAM.
5. Press or to start channel programming. The TV will automati-
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
“PROGRAMMING NOW-PLEASE WAIT” appears.
6. When channel programming is complete, the message “COMPLETED”
appears.
7. Press CH + or – to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add
or erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If adding channels, you must select the channel to add using the
Channel Number buttons.
2. Press MENU, then press or
to display the SETUP menu.
3. Press ▲ or ▼ to highlight ADD/
ERASE.
4. Press or to select ADD or
ERASE, whichever function you
want to perform.
5. Repeat steps 1–4 for other
channels you want to add or erase.
Changing channels
To change to the next programmed channel:
Press Channel ▼ or ▲ on the TV or CH + or – on the remote
control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100) on the remote
control.
For example, to select channel 125, press 100, 2, 5.
POWER
1 2 3
4 5 6
7 8 9 0
TV VCR CABLE
DVD
100
CH +
CH –
FAV EXIT RECALL TV/VIDEO
CH RTN
CODE MTS SLEEP MUTE
RESET CAP/TEXT
DVD CLEAR DVD MENU TOP MENU
1/2
MENU/
ENTER
VOL
FAV
VOL
+ –
+10
VOL
DISPLAY
Menu
Exit
PICTURE AUDIO SETUP OPTION
CH
CH PROGRAM
ADD / ERASE
START
ADD
SELECT ADJUST
TV / CABLE TV CABLE
PICTURE AUDIO SETUP OPTION
CH
CH PROGRAM START
SELECT ADJUST
TV / CABLE CABLE
ADD / ERASE ADD ERASE
Setting up
your TV
Channel +/–
Channel
Numbers
J3N51521A(E)_P07-16 20/12/2004, 2:59 PM 16