Setting the tcp/ip for static ip address, P.103 “setting the tcp/ip for static ip address – Toshiba E-STUDIO 232 User Manual
Page 105
103
4
5
Continue to another network setting if required, then press the
[APPLY NOW] button.
• This equipment starts initializing the network interface card to apply the changes.
Setting the TCP/IP for Static IP Address
1
Press the [NETWORK] button in the ADMIN menu.
• The NETWORK menu is displayed.
To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”. P.82
2
Press the [TCP/IP] button.
• The TCP/IP screen is displayed.
This manual is related to the following products: