Toshiba Strata DK 2000-series - Manual (Page 123)

LCD Operation
Memos
Strata DK Digital Telephone 6/00
111
➤
To return to a busy station message after receiving a busy station message
Memos
Speed Dial Memos
You can store names (12 characters max.) for each of 40 station speed dial numbers.
The memo pad of names can be scrolled to select the appropriate party. The station
must be enabled via system programming for LCD message memory.
➤
To program Speed Dial names and numbers
1. Press 0RGH + .
2. Enter the message
number.
Station message (10~19) and system message (60~99).
The LCD displays the message. (This assumes the
message is already stored in memory.)
3. Press 3DJH . Your LCD confirms the
message was sent.
1. Press 5HGLDO , then
6SHHG 'LDO .
2. Dial a station speed
dial code.
See Table 16 on Page 136 for
speed dial codes.
3. Press 0RGH . If a name was previously
stored on this code, it appears
on the top line.
OVR TO ST210
MSG NO?
MSG SEND
# * 10 SPEED DIAL
*10 NAME
SPEED DIAL