Toshiba MW24F11 - Manual (Page 38)

38
Recording (VCR)
Press STOP to stop recording.
“ ” will appear on screen for about
4 seconds.
Note:
The pause function will be released after 5 minutes to prevent
damage to the tape or the unit. The unit will change to the STOP
mode.
To stop recording temporarily
This VCR will automatically rewind the tape when the tape
has ended (except during OTR and timer recording). It will
also eject the tape.
Auto Rewind feature
To stop recording
+0
Note:
If the erase prevention tab is removed, the tape will eject when
REC button is pressed for recording.
Press PAUSE/STILL to avoid recording unwanted
material.
“ ” will appear on the screen and
the REC/OTR indicator will blink on
and off. Press PAUSE/STILL or
REC to continue the recording.
Recording a TV program
Recording and viewing the same TV program.
Load a cassette tape with the erase
prevention tab intact.
The unit will automatically turn on.
1
00 : 00 : 00 SP
CH 110
+0
Press SPEED to select the desired tape speed
SP or SLP.
The tape counter and SP or SLP will
appear on the screen for about 4
seconds.
2
Select “TV” or “CABLE” to the appropriate
position 26 .
3
TV - VHF/UHF channels
CABLE - Cable TV channels
Press Direct channel selection (0–9) buttons or
CH / to select the channel to be recorded. 4
Press REC.
“ ” will appear on the screen for
about 4 seconds and the REC/OTR
indicator on the front panel will light.
5
Notes:
• If power is switched off during recording, the TV and the
DVD sections go off and the VCR continues to record.
Press the STOP button to halt the recording and turn off the
VCR.
• The unit channel cannot be changed during recording.
• If you record the TV program after the DVD playback, you
must set the unit to TV/VCR mode using the TV/VCR button.
Recording a TV program
REC/OTR
REC/OTR
TV/VCR
PAUSE/STILL
SPEED
0–9
CH /
STOP
REC
5T40301A [E]p38-41 3/1/05, 10:18 38