Teac DVD Receiver DR-H300 - Manual (Page 32)

32
DVD VCD
Settings for DVD playback (introduction)
Enter the menu item with the right cursor button. 4
Use the up and down cursor buttons to select the
options within the menu item, and ENTER to confirm
the entry. 5
Individual menu functions are described on pages 33 through
37.
Repeat
steps through as required.
Exit the setup mode by pressing SETUP once more. 6
5 3
This chapter describes how to use the SETUP menu. Most
settings and adjustments are required to be set when you first
use the system.
Using the SETUP menu, you can adjust the picture size, set a
preferred language for audio and the OSD (on screen displays),
limit playback by children, et cetera.
Turn on the main unit, and the television (monitor). 1
Press the SETUP button. 2
The setup menu appears on the screen.
< Exit the setup mode by pressing SETUP once again.
< Although it is possible to enter the setup menu while
playback is continuing (or in resume mode), not all menu
functions will be available. Expand the number of available
functions by pressing the STOP button twice.
Use the cursor buttons to navigate the menus. 3
If no cursor is visible on the screen, use the left and right
buttons to select a page.
Use the up and down buttons to highlight menu items within
the selected page.
Press the left button to return to the upper menu.