Toshiba SD-3900 - Manual (Page 16)

1-17
Operation with DVD and Video CD
Playing a DVD and Video CD
Playback Setup
z Turn on the TV and select the video input source con-
nected to the DVD player.
z Audio system: Turn on the audio system and select
the input source connected to the DVD player.
1
Press OPEN/CLOSE to open the disc tray.
2
Load your chosen disc in the tray, with the
playback side down.
3
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which offer a menu.
Use the b B v V buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TOP MENU or MENU to return to the menu
screen.
z Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
z Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
14.
Notes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control”, on page 15).
– DVDs may have a region code.
Your player will not play discs that have a region code
different from your player. The region code for this
player is 1 (one).
General Features
Note
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
Moving to another TITLE
When a disc has more than one title, you can move to
another title as follows:
z Press DISPLAY, then press the appropriate num-
bered button (0-9) to select a title number.
Moving to another CHAPTER/TRACK
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
z Press SKIP . or > briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
z Press SKIP
. twice in quick successions to step
back to the previous chapter/track.
z To go directly to any chapter during DVD playback,
press DISPLAY. Then, press
v/V to select the
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
Note
For two-digit numbers, press the numbered buttons
(0-9) in rapid succession.
Search
1 Press REV
m
or FWD M during playback.
The player will now go into SEARCH mode.
2 Press REV
m
or FWD M repeatedly to select the
required speed:
m
X2,
m
X4,
m
X16,
m
X100
(backward) or MX2, MX4, MX16, MX100
(forward).
With a Video CD, the Search speed changes:
m
X2,
m
X4,
m
X8, (backward) or MX2, MX4, MX8,
(forward).
3 To exit SEARCH mode, press PLAY.
Still Picture and Frame-by-frame playback
1 Press PAUSE/STEP during playback.
The player will now go into PAUSE mode.
2 You can advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly on the remote con-
trol.
VCD1.1 VCD2.0 DVD
VCD1.1 VCD2.0 DVD
1 /12 1 /12 VCD2.0 VCD1.1 DVD
1 /3
DVD
VCD2.0
DVD
VCD1.1 VCD2.0 DVD