Features, Technical support and service – Tyco Electronics PL0349 User Manual
Page 2
8 Port Ethernet Smart Switch With Fibre Uplink
Tyco Electronics
Page 2
Features
8 Auto-sensing 10/100Base-T RJ-45 Ethernet ports
1 Fibre Uplink Port (100Base-FX Format)
Full auto-MDI/MDI-X on all Ethernet copper ports
removes the need for cross-over cables
Meets IEEE 802.3, .3u and .3x Ethernet standards
Uses store-and-forward switching to separate collision
domains and provide abnormal packet filtering
Console port enables basic management of the switch
Supports up to 7 port based VLANs
Integral 4K MAC address table automatic learning
Large 2Mb packet buffer
Very high backplane bandwidth
Supports back-pressure & flow control
Numerous diagnostic LED indicators
Very compact, stand-alone or 10” rack mounting
Optional 19” rack mounting
FCC Class A and CE mark certification
Technical Support and Service
If you require technical advice for these products, please see the
FAQ pages on the web address
If you still have problems, please contact us using the support form
located on the above web site.
If you have a faulty unit then please contact us through the web
site to arrange for a replacement unit. The faulty unit must be
returned to us as part of the replacement agreement.