Monitoring the converter through management module – D-Link DMC-810SC User Manual
Page 6
6
y First, install the converter onto a carrier supplied with
the chassis:
Step 1- Unscrew and pull out the media converter board.
Step 2- Plug in the media board to any of the vacant slot.
Step 3- Fit the converter onto the carrier and use the screw
to secure it.
Monitoring the Converter through
Management Module
There is a management module that can control this media
converter through the chassis system, this media converter
can be controlled through Web Browser, SNMP and terminal
emulation program.
The management module will detect the default reset on the
DIP switches and display out the status, also the
management module can control the function through the
chassis system.