Toshiba 32HL85 - Manual (Page 14)

14
(E)32HL85
Connecting
y
our T
V
Note:
If you have VCRs with S-video, use S-video
cables instead of standard video cables for
better picture performance.
Do not connect the same VCR to the output
and input jacks on the TV at the same time.
To dub or edit, VCR 2 must select LINE IN,
and the TV must select VIDEO 1.
Note:
• If you have a camcorder with S-video, you
can use an S-video cable instead of a
standard video cable for better picture
performance. Plug the S-video and
standard audio cables into the “VIDEO-1
IN” inputs on the upper back panel of the
TV instead of the inputs on the side panel.
• You can connect the camcorder to either
set of VIDEO-2 IN terminals (on the side
panel or upper back panel); however, do
not connect devices to both sets of VIDEO-
2 IN terminals at the same time or the
picture performance will be unacceptable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
Connecting two VCRs
This connection allows you to record (dub/edit) from VCR1 to
VCR2 while watching a videotape. You also can record from one TV
channel with VCR1 while watching another TV channel.
You will need:
• two coaxial cables
• two sets of standard A/V cables
IN from ANT OUT to TV
VIDEO AUDIO
L R
IN
OUT
IN from ANT OUT to TV
CH 3
CH 4
VIDEO AUDIO
CH 3
L R
CH 4
IN
OUT
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one set of standard A/V cables
VCR1 (plays)
From
Antenna
TV upper back panel
VCR2 (records)
Camcorder
TV side panel
(VIDEO-2 IN)
TV lower back panel
S-VIDEO VIDEO AUDIO
OUT
L
R
#01E09-15_32HL85 05.5.11, 5:44 PM 14
Black