Texas Instruments MC-780PIx User Manual
Page 41
Optical Elements and Other Specifications
7-3
Specifications
7.2
Optical Elements and Other Specifications
Table 7–3 lists other specifications common to the two cameras.
Table 7–3. Optical Elements and Other Specifications
Item
Specification
Lens Mount
C-mount
Flange back
17.526 mm (can be fine adjusted)
Synchronization System
Internal/External
Sync Input/Output
HD/VD (signal level:TTL level)
Jitter
Within
±
60 nsec
Scanning Method
2:1 interlace/non-interlace
Image Output
1.0 V p-p, Sync negative, 75
Ω
unbalanced
Horizontal Resolution
More than 565 lines
Illumination
0.8 Lux (fixed gain, see Note 1)
Minimum Illumination
0.1 Lux (maximum gain, see Note 1)
S/N Ratio
MC–780PIA: over 53 dB
MC–780PIH: over 55 dB
Gain
Auto gain adjust/fixed gain/variable gain
gamma Characteristics
gamma = 1/0.45
White Clip
120IRE
±
15IRE
Shutter Modes
Continuous shutter/random shutter/VI-mode shutter
Shutter Speeds
1/500, 1/750, 1/1000, 1/1500, 1/2000, 1/3000. 1/4000, 1/8000
Power Source
12 V (range 10.5 V to 15 V)
Power Consumption
Approximately 4.2 W
Operating Temperature
0–40
°
C
Operating Humidity
20–80% (There must be no dew formation.)
Maintenance Temperature
–20
°
C to +60
°
C
Maintenance Humidity
20–95% (There must be no dew formation.)
Oscillation
4.4 G (11–100 Hz)
Exterior Dimensions
44(W)
48(H)
112(D) mm (includes protruding section)
Weight
215 g
Accessories
Focus Ring Cap (1)
User’s Manual (1)
AC Adaptor
Japan Local Model (PS-78012J)
1) Illumination measured with Davitson Optronics Optoliner.
2) These specifications may change without notice due to improvements.