Trek Incite 6i - Manual (Page 8)

7
To set a custom wheel size
1. Cycle Mode to TME.
2. Hold Set.
The wheel selection icon appears in the upper left corner.
3. Cycle Set to your preferred wheel.
4. Cycle Mode to the four-digit number.
5. Press Set.
6. Cycle Mode to your preferred first digit value (see Table 3).
Table 3- Wheel size and corresponding settings in millimeters
700 x 20 2086 26 x 1.5 2010
700 x 23 2096 26 x 1.90 2045
700 x 25 2105 26 x 1.95 2050
700 x 28 2136 26 x 2.0 2055
700 x 32 2155 26 x 2.1 2068
700 x 35 2168 26 x 2.2 2075
700 x 38 2180 Custom 0000 - 2999
7. Press Set to select.
8. Repeat steps 6 and 7 for each following digit.
9. Hold
Set.
The computer returns to current speed display.
To select the wheel size
1. Cycle Mode to TRP.
2. Hold both left Mode and right Mode at the same time.
The wheel icon changes, indicating the wheel selection has changed. Repeat step 2 to change to the other wheel size.
To restart the trip modes
The trip modes include TRP, AVG, TME, and MAX. This operation sets all four values to zero, allowing
the computer to display information for a single ride.
1. Cycle
Mode to MAX.
2. Hold Set, and do not let up until after completion of step 3.
3. Hold Mode.
The Max setting restarts at ʻ0ʼ.
Setting the computer