Technicolor - Thomson CP-2016-007 - Manual (Page 20)

15
In Region Code programming mode, only the circled keys
are active.
Keypad Function Description
FLASH button - Start the reprogramming process
HOLD button - End the reprogramming process
Number keys 1-9 - Region codes 1-9
Reprogramming Procedure
1. With the Aura SoHo™ Conference Phone in the On Hook state,
meaning off, press the FLASH button and keep holding it down
for 5 seconds. The keyboard backlight will come on and stay on.
Keep holding the FLASH button for another 5 seconds until the
keyboard backlight begins to flash. Release the FLASH button.
2. Enter the correct region code number based on your location
on the keypad. Only numbers from 1 to 9 will be accepted and
only the last number entered will be stored.
3. Exit the entry process. Press the HOLD button and the new
region code will be stored. If no number has been entered, the
region code will not be changed.
The process times out after 5 minutes. If no data has been entered
in that time, the Aura SoHo™ Conference Phone will automatically
revert to normal operation. No data will be stored.
INTERNATIONAL ONLY