Toshiba MV19N2/W - Manual (Page 45)

43
CALL
MENU
– SET/TR
+
ENTER
SP/SLP
CANCEL
MUTE
SLEEP
PO
WER
CLOSED CAPTION
CHANNEL RETURN DIGIT
AL
TRA
CKING
0
8
7
9
6
5
4
3
2
1
PR
OGRAM
PA
USE/STILL
TIMER
REC
ST OP
PLA
Y
FF
REW
ZER
O
RETURN
COUNTER
RESET
INPUT SELECT
SKIP SEARCH
REC
EJECT
VOL+
VO
L–
CH
–
CH+
5
7
SET/TR ENTER
NOTES: • The VCR section cannot be used while the TIMER REC indicator is lit. If you want to use the VCR operation,
press both the TIMER REC buttons at the same time to deactivate the timer.
• After a power failure or disconnection of the power plug, all programed recording setting and time display will be lost
upon resumption of power. In this case, reset the clock (see pages 15-17) and reprogram any timer recordings.
• If you want to correct the digits while setting, press the CANCEL button until the item you want to correct, then
press the SET/TR + or – button to correct the desired setting.
4
5
TIMER REC
To set the timer for another program, press the
SET/TR + or – button until the number of the
second program blinks, then press the ENTER
button. Repeat steps 4 to 5 to set the second
program.
5
Set the start time, end time, channel and tape speed as in step 4.
7 6
б+/Р/ENTER/CANCEL/MENUñ
----- --- -
-----
23 TH 007
--- -
----- --- -
----- --- -
----- --- -
----- --- -
----- --- -
7:00 PM 9:30 PM SLP
-:--
-:--
-:--
-:--
-:--
-:--
-:--
-:--
-:--
-:--
-:--
-:--
-:--
-:--
TIMER REC SET
〈+/–/ENTER/CANCEL/MENU〉
DATE
START
END
CH
SPEED
23 (THU)
7 : 00 PM
9 : 30 PM
007
SLP
To cancel timer recording, press both the buttons again
and TIMER REC indicator will go off.
Press both the TIMER REC buttons at the same
time. The TIMER REC indicator will light. The
Timer is programed, when the programed time is
reached, the recording is automatically started.
TIMER
REC
5E20101B P34-43 14/08/2003, 15:50 43