Picture control adjustments, Brightness contrast – Toshiba MV19N2/W User Manual
Page 33
31
CALL
MENU
– SET/TR
+
ENTER
SP/SLP
CANCEL
MUTE
SLEEP
PO
WER
CLOSED
CAPTION
CHANNEL
RETURN
DIGIT
AL
TRA
CKING
0
8
7
9
6
5
4
3
2
1
PR
OGRAM
PA
USE/STILL
TIMER
REC
ST
OP
PLA
Y
FF
REW
ZER
O
RETURN
COUNTER
RESET
INPUT SELECT
SKIP SEARCH
REC
EJECT
VOL+
VO
L–
CH
–
CH+
Picture controls are factory preset but you can adjust them individually as follows:
PICTURE CONTROL ADJUSTMENTS
2
Press the SET/TR + or – button to select the
PICTURE option, then press the ENTER button.
1
M E N U
TIMER REC SET
TV SETUP
CH SETUP
AUTO REPEAT ON OFF
SYSTEM SETUP
б+/Р/ENTER/MENUñ
BRIGHTNESS
0
〈+/–/ENTER/CANCEL/MENU〉
CONTRAST
32
〈+/–/ENTER/CANCEL/MENU〉
Press the ENTER button until “CONTRAST” appears
on the screen, then press the SET/TR + or – button to
adjust the contrast of the picture. Pictures look
sharpest in the daytime (bright light) by increasing the
contrast. At night (dim light), the sharpest picture is
obtained by reducing the contrast.
NOTE: The CONTRAST default
setting is set to maximum
at the factory.
BRIGHTNESS
CONTRAST
TV SETUP
V-CHIP SET
ON/OFF TIMER
PICTURE
б+/Р/ENTER/MENUñ
To display the picture adjustment screen, press
the MENU button. Press the SET/TR + or –
button to select the TV SETUP option, then
press the ENTER button.
Press the ENTER button until “BRIGHTNESS” appears
on the screen, then press the SET/TR + or – button
to adjust the brightness of the picture. When the
SET/TR + button is pressed, the darker portions of
the picture become lighter.
1
1
2
SET/TR
ENTER
MENU
SET/TR
ENTER
SET/TR
ENTER
SET/TR
ENTER
5E20101B P20-33
14/08/2003, 15:50
31