Windows 9x/me setup – TRENDnet TEW-P1U1P User Manual

Page 20

Text mode
Original mode

Windows 9x/ME Setup

Before performing the following procedure, the Wireless Print Server must be installed on your
LAN, and configured as described in Chapter 3. Both the Wireless Print Server and the
attached printer should be powered ON.

1. Insert the supplied CD-ROM into your drive. If the setup program does not start, run

SETUP.exe in the root folder.

2. Click

Installation button, then select the User Install.

Figure 13: Installation Screen

3. Follow the prompts to complete the installation of the Peer-to-peer Printer Port Driver.

(Refer to the Windows section of Chapter 8 - Troubleshooting if there is a problem with
the installation.)

4. The

Print Driver Setup will then run.

In future, you can use Start - Programs – Print Server Utility – Printer Driver Setup to run the
program again.

Page 16