Hyundai H-CMD7079 - Manual (Page 23)

23
Panel Numeric Pad functions
The number 1-6 buttons contain dual functions during disc play. After pressing SETUP button on the RC or
6/SET/PAU button on the panel, the setup menu will be prompted. Then the number buttons are for navigating and
confirming the commands.
Button 1: Left/Display OSD
Press 1/LEFT/OSD button to navigate the setup menu leftward. Press and hold the button for 3 seconds for OSD
functions, so that disc details will be displayed.
Button 2: Right/Repeat
Press 2/RIGHT/RPT button to navigate the setup menu rightward. Press and hold the button for 3 seconds for
repeating the same track continuously. “RPT” will appear on the display. Press and hold this button again to change
repeat playback mode. Press and hold this button for a third time to cancel repeat playback. You can also use
AMS/RPT button on the RC to perform this operation.
Button 3: Up/Scanning Tracks (Intro Play)
Press 3/UP/INT button to navigate the setup menu upward. Press and hold the button for 3 seconds to play the first
15 seconds of each track. “INT” will appear on the display. Press this button again to resume playback.
Note: Intro play function is not available for DVD discs.
Button 4: Down/Random
Press 4/DOWN/RDM button to navigate the setup menu downward. Press and hold the button for 3 seconds to play
all the tracks in random order. “RDM” will appear on the display. Press this button again to stop random play. You
can also use LOC/RDM button on the RC to perform this operation.
Note: Random play function is not available for DVD discs.