Technicolor - Thomson DPL911VD - Manual (Page 3)

Safety Information
Thomson Information
CAUTION!
Invisible laser radiation when open. Avoid exposure to beam.
Class 1 laser product. This system must be opened only by
qualified technicians to prevent accidents caused by the laser
beam.
LASER λ = 780nm, P max=5 mW
Rating Information : At the bottom of the unit.
This unit complies with the existing requirements.
In accordance with the rating plate of the unit, this unit com-
plies with current standards concerning electrical safety and
electromagnetic compatibility.
Please respect the environment!
Before throwing any batteries away, con-
sult your distributor who may be able to
take them back for specific recycling.
In accordance with the rating plate of
the unit, this unit complies with current
standards concerning electrical safety
and electromagnetic compatibility.
Have a Blast-Just Not in your eardrums
Make sure you turn down the volume on
the unit before you put on headphones.
Increase the volume to the desired level
only after headphones are in place.
ADVARSEL!
USYNLIG LASERSTRÅLNING VED ÅBNING NAR
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.
UNGDÅ UDSAETTELSE FOR STRÅLNING.
VORSICHT!
UNSICHTBARE LASERSTRALUNG
WENN ABDECKUNG GEÖFFNET UND SICHERHEITS–
VERRIEGELUNG ÜBERBRÜCKT.
NICHT DEM LASERSTRAHL AUSSETZEN!
CAUTION – INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS FAILED OR
DEFEATED. AVOID EXPOSURE TO BEAM.
ATTENTION – RAYONNEMENT LASER INVISIBLE
DANGEREUX EN CAS D'OUVERTURE ET LORSQUE
LA SECURITE EST NEUTRALISEE.
EXPOSITION DANGEREUSE AU FAISCEAU.
FOR UNITED KINGDOM VERSION ONLY
CONNECT THE MAIN LEAD INTO A MAINS POWER
SOCKET
POWER SUPPLY 230V ~ 50 Hz. It must not be connected to
D.C. mains.
Note: The mains lead of the sets is fitted with a moulded plug.
If the mains sockets are not compatible or if for any reason
the plug is removed please follow the directions below. The
moulded plug cannot be rewired and if removed must be dis-
posed of safely.
Do NOT under any circumstances plug the severed plug into
any mains socket as this could result in electric shock.
Important: If the plug is removed rewire the new plug as
follows:
The wires in the mains plug are coloured in accordance with
the following code:
BLUE = NEUTRAL / BROWN = LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
BLUE wire to the terminal coded N (Neutral) or coloured black.
BROWN wire to the terminal coded L (Live) or coloured red.
WARNING: TO PREVENT FIRE OR ELECTRICAL
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE EXCLAMATION
POINT WITHIN THE
T R I A N G L E I S A
WARNING SIGN
ALERTING YOU OF
I M P O R T A N T
I N S T R U C T I O N S
A C C O M PA N Y I N G
T H E P R O D U C T. T H E L I G H T N I N G
FLASH AND ARROW-
HEAD WITHIN THE
T R I A N G L E I S A
W A R N I N G S I G N
ALERTING YOU OF
" D A N G E R O U S
VOLTAGE" INSIDE
THE PRODUCT. CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
D O N O T R E M O V E C O V E R
( O R B A C K ) . N O U S E R -
S E RV I C E A B L E PA R T S I N -
S I D E . R E F E R S E RV I C I N G
T O Q U A L I F I E D S E R V I C E
PERSONNEL.
Do NOT make any connection to the
terminal in the plug which is marked
by the letter E or by the earth symbol
or coloured green or green and yellow.
A fused plug must be fitted with
a 3A fuse approved by ASTA or
BSI to BS1362 and fuse covers
must be always be securely re-
placed. If your set does not
work, the fuse may be blown.
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL A LASER DE CLASSE 1
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPP ARAT
VARNING–
OSYNLIG LASERSTRÅLNING NÄR DENNA DEL
ÄR ÖPPNAD OCH SPÄRRAN ÄR URKOPPLADE.
BETRAKTA EJ STRÅLEN.
VARO!
AVATTAESSA JA SOUJALUKITUS OHITETTAESSA
OLET ALTTIINA NÄKYMÄTTÖMÄLLE.
LASERSÄTEILYLLE ÄLÄ KATSO SÄTEESEEN.