Toshiba CS6940CL - Manual (Page 4)

Rev 1.0
(13) Power supply voltage DC12 V 10% (ripple 50 mV(p-p) or less)
(14) Power consumption Approximately 2.8 W
Electronic shutter specification
(1) Shutter speed AE/MANU switching (initial factory setting: MANU)
Readout mode
All pixel readout 1/15 to 1/35000 s (1250 levels)
Partial scan 1/30 to 1/35000 s (625 levels)
High-speed draft readout 1/48 to 1/35000 s (313 levels)
(2) Random trigger shutter ON/OFF switching (initial factory setting: OFF)
Fixed mode The exposure time depends on the shutter speed setting.
Pulse width mode The exposure time depends on the pulse width.
(3) Multiple-shutter ON/OFF switching (initial factory setting: OFF)
Exposure by TRIG input, readout by MULTI input
* Enabled when random trigger shutter is ON.
[Internal sync signal specification]
(1) Driving frequency 36.000 MHz
(2) Scanning frequency
Readout mode
All pixel readout Horizontal :18.750 kHz
Vertical :15.000 Hz
Partial scan Horizontal :18.750 kHz
Vertical :30.000 Hz
High-speed draft readout Horizontal :15.000 kHz
Vertical :47.293 Hz
Input signal specification
(1) TRIG Camera link I/F and DC IN connector input
Signal level (DC IN input) TTL level
Polarity Positive/Negative polarity switching possible (initial factory setting: Negative)
Pulse width 53.3 s or more
(2) MULTI Camera link I/F input
Polarity Negative polarity
Pulse width 53.3 s to 10 ms
D4134176A