Toshiba CS6940CL - Manual (Page 3)

Rev 1.0
4. Optional parts
(1) Power cable Model name: CPRC3700-**
(2) Camera Link cable Model name: 14B26-SZLB-***-0LC
(3) Camera adapter Model name: CA130C
(4) Camera mounting kit Model name: CPT4000CL
*NOTE: Application software is not supplied as a standard item.
Notes on optional parts and compliance with safety standard conditions:
We assure the compliance of this camera with the safety standard when it is used in combination with the
optional parts listed above.
If you use the camera in combination with parts other than specified by our company, you are responsible
for finally confirming the compliance with the safety standard by using the entire machine/equipment.
5. Specifications
[Electrical specification]
(1) Imager Interline CCD
Number of total pixels 1688 (H) x 1248 (V)
Number of effective pixels 1628 (H) x 1236 (V)
Pixel size 4.4 m (H) x 4.4 m (V)
Optical size 1/1.8 type
Color filter RGB primary color mosaic-on-tip color filter
(2) Scan method Progressive
(3) Aspect ratio 4:3
(4) Synchronization method Internal synchronization
(5) Standard subject illuminance 2000 lx, F11, 5000 K
(6) Minimum subject illuminance 7 lx F1.4, GAIN MAX, all pixel readout, video level 50 %
(7) Video output Compliant with the camera link standard.
Data RGB 24bit
Readout mode
All pixel readout Approximately 15 fps / 1628(H) x 1236(V)
Partial scan Approximately 30 fps / 1628(H) x 552(V)
High-speed draft readout Approximately 48 fps / 1628(H) x 309(V)
(8) Gain 0 to +6 dB (256 levels) (initial factory setting: 0 dB)
(9) Setup 4 to 27 LSB (32 levels) (initial factory setting: 16 LSB (calculated value) )
(10) White balance OPWB/MANU switching (initial factory setting: MANU)
(11) Gamma correction ON/OFF switching (initial factory setting: ON)
(12) Masking correction ON/OFF switching (initial factory setting: OFF)
D4134176A