13 – specifications, General, Input and output – Tascam HS-8 User Manual
Page 67: Analog audio input and output connectors, Digital audio input and output connectors, General input and output, Analog audio input and output, Connectors digital audio input and output, Connectors, 67 general
TASCAM HS-8
67
General
Recording media
CompactFlash (CF) card
File system
FAT32
File format
BWF (Monophonic, Polyphonic)
Number of channels
8 channels (44.1/48/88.2/96 kHz)
8 channels + stereo mix (44.1/48 kHz)
4 channels (176.4/192 kHz)
Quantization bit rate
16/24
Sampling frequency
44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ± 0.1% pull-down/pull-up)
Reference clock
Internal, Word In, Video In, Digital In (AES 1-8 IN, AES
A-BIN, ADAT 1-8 IN)
Time code frame rate
23.976, 24, 25, 29.97DF, 29.97NDF, 30DF, 30NDF
Limiter
Attack time: 3 msec
Release time: 300 msec
Threshold: -5 dBFS
Ratio: 32:1
Input and output
Analog audio input and output connectors
The error for nominal and maximum levels is ±1 dB for all
input and output jacks except the
PHONES
jack.
ANALOG INPUT (1-8)
Connector: 25-pin D-sub
Input impedance: 10 kΩ
Nominal input level:
When reference level is –9 dB: +6 dBu (1.55 Vrms)
•
When reference level is not –9 dB: +4 dBu (1.23
•
Vrms)
Maximum input level (selectable): +15 dBu (4.36 Vrms),
+18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), +22 dBu
(9.76 Vrms), +24 dBu (12.28 Vrms)
ANALOG INPUT (L/A, R/B)
Connector: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance: 10 kΩ
Nominal input level:
When reference level is –9 dB: +6 dBu (1.55 Vrms)
•
When reference level is not –9 dB: +4 dBu (1.23
•
Vrms)
Maximum input level (selectable): +15 dBu (4.36 Vrms),
+18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms), +22 dBu
(9.76 Vrms), +24 dBu (12.28 Vrms)
ANALOG OUTPUT (1-8)
Connector: 25-pin D-sub
Output impedance: 100 Ω
Nominal output level:
When reference level is –9 dB: +6 dBu (1.55 Vrms)
•
When reference level is not –9 dB: +4 dBu (1.23
•
Vrms)
Maximum output level (selectable): +15 dBu (4.36
Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms),
+22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms)
ANALOG OUTPUT (A/B)
Connector: XLR-3-32 (1: GND, 2: HOT, 3: COLD) output
impedance: 100 Ω
Nominal output level:
When reference level is –9 dB: +6 dBu (1.55 Vrms)
•
When reference level is not –9 dB: +4 dBu (1.23
•
Vrms)
Maximum output level (selectable): +15 dBu (4.36
Vrms), +18 dBu (6.16 Vrms), +20 dBu (7.75 Vrms),
+22 dBu (9.76 Vrms), +24 dBu (12.28 Vrms)
PHONES
Connector: standard 6.3-mm (1/4”) stereo jack
Maximum output level: 45 mW + 45 mW or more
(THD+N 0.1% or less, into 32 Ω)
Digital audio input and output connectors
DIGITAL IN/OUT (AES/EBU)
Connector: D-Sub 25-pin
Minimum input voltage: 2 Vp-p
Maximum input voltage: 7 Vp-p
Output voltage: 2–5 Vp-p
Format: AES3-2003/IEC60958-4 (AES/EBU)
DIGITAL I/O (ADAT)
Connector: optical
Format: ADAT
DIGITAL INPUT A-B
Connector: XLR-3-31
Maximum/minimum input signal voltage amplitude:
2–7 Vp-p/110Ω
13 – Specifications