First steps with your cd-vt1 – Tascam CD-VT1 User Manual
Page 6
6
— TASCAM CD-VT1
TASCAM CD-VT1 —
7
First steps with your CD-VT1
hen the battery level drops the unit
automatically shuts down and must be
restarted with the
POWER
switch after
the batteries have been replaced
ote that the battery indicator on the
display only provides a rough estimate
of remaining battery life and under
some circumstances there may not be
enough power in the batteries to power
the despite the battery
power indication on the display
Using an AC adapter
nly use a adapter
not supplied sing another type of
adapter may damage your
lways make sure that the voltage
matches the voltage written on the
adapter
NOTE
Always remove batteries when operating the
unit with an AC adapter. If batteries are ac-
cidentally left in the unit when it is operated
with an AC adapter, always switch off the
unit before changing from AC adapter to
battery power or switching from battery to
AC adapter operation.
Switching on the unit
e has two power switches
se the first
POWER
switch sliding
switch to turn the power to the whole
unit on and off
e second switch
MIC ON/OFF
controls the power to the
MIC
jacks
and effect unit f this section is off you
cannot use these jacks or use any of the
vocalrelated menu systems effect and
voice changer
lso note the
HOLD
switch that locks
the s controls and keys when
it is in the
ON
position
HOLD
appears in
the display when this switch is on
Auto power-save
f the unit is powered using batteries
for more than minutes in stop mode
or with no disc loaded or opened the
player shuts down display shows
CD OFF
but you can still use the vocal
section
estart the player alone by using
the
y/J
key or use the
POWER
switch if both the and vocal sec
tions are turned off