Tascam CD-VT1 - Manual (Page 5)

TASCAM CD-VT1 —
5
First steps with your CD-VT1
First steps with your CD-VT1..... 5
Making connections .................. 7
Using the menus........................ 9
Using the CD player................. 10
Pitch and tempo changes ........ 12
Using effects............................ 13
Facts & figures (specifications) 15 About this manual
hen we refer to a key or connector
or control on the  we write it
like this PLAY 
hen we refer to an item shown on the
display we write it like this MENU 
Inserting batteries
e  uses four  
batteries not supplied e recom
mend the use of rechargeable i
batteries alkaline batteries may also
be used
 lways use batteries of the same
type
 lways replace all batteries to
gether
 f you are not going to use the
 for some time remove
the batteries
 lace the batteries following the +
and – markings inside the battery
compartment
 aximize battery life by using
the unit in the following tempera
ture range ˚ to ˚ ˚ to
˚ ickelhydride batteries
may exhibit reduced performance
in an environment under ˚
˚ lso if these batteries
are not used for some time after
charging they may also exhibit
reduced performance
 e performance of alkaline bat
teries also depends on temperature
and time since manufacture low
temperatures and longer periods
mean shorter battery life regard
less of the battery indicator as
shown on the display ear this
in mind when operating the unit
and use freshly recharged nickel
hydride batteries new alkaline
batteries or use an  adapter if
battery life seems inadequate
 lways dispose of used batteries
as recommended by your local
authorities