Toshiba SD-5980SU - Manual (Page 36)

36
JPEG Interval
You can continuously play back all JPEG files automati-
cally.
After the setting below, start playing the disc on which
JPEG files have been recorded.
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at
5 second intervals.
10 Seconds:
Plays back images in the form of a slide show at
10 second intervals.
15 Seconds:
Plays back images in the form of a slide show in
15 second intervals.
Customizing the function settings (continued)
Picture Mode
There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at 30 frames per
second). Make this selection according to the type of
content being viewed.
Auto:
Select this position normally.
The DVD player automatically detects source
content, film or video, of playback source, and
converts that signal in the progressive output
format in an appropriate method.
Film:
The DVD player converts film content pictures
in the progressive output format appropriately.
Suitable for playback of film content pictures.
The progressive output feature will be most
effective under this selection.
Video:
The DVD player filters video signal, and
converts it in the progressive output format
appropriately.
Suitable for playback of video content pictures.
Note:
Depending on the disc, pictures may be cut off or doubled.
In this case, select “Video”.
Setting details
Function setup
QSound
This DVD video player equipped with a “QSound”. It can
produce the effect of being in a cinema or a concert hall.
On: The QSound operates.
Off: The QSound is disengaged.
Dialogue
QSound
Digital Out
Off
PCM
/Setup/Return
Off: DRC (Std)
On: DRC (TV):
Loud sound such as explosion or similar is toned
down slightly when played back. This makes it
suitable for when it is connected to a stereo.
Off: DRC (Std):
It plays back at the recording level on the disc.
Notes:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
Dialogue
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound for
your equipment.
Note:
The QSound setting can also be changed with AUDIO on
the remote control. (See page 28.)
Digital Out
Selected the output sound format corresponding to your
system connection.
PCM:
Select when connected to a 2 channel digital
stereo amplifier.
Raw:
Disc audio raw data will be output.
Notes:
• When you make a connection to a TV, or Dolby
Surround Pro Logic or stereo system via the analog
audio jacks, select "PCM" or "Raw".
• If apply HDMI connection to TV, make sure to select
"PCM", audio signal passing to TV via HDMI cable.
2F60201A [E] P34-38 2/22/05, 10:48 AM 36